I'm using the gear ratios from this website
Run1: 361hp@6739rpm, 408Nm@5433rpm

Run2: 344hp@6137rpm, 385Nm@5976rpm

Run3:369hp@6574rpm, 387Nm@6383rpm

Well, although the figures vary with each run, sure it's about there. Take a look at Edge's dyno figures for PE1825 here. They achieved 347bhp@6628rpm but with 454Nm@5082rpm.
The hp figures are quite close but the torque figures are way above mine and it comes in earlier as well! That's something I have to work towards :-)
No comments:
Post a Comment