Ok, I just did about 20 WOT 3rd gear pulls using ROM "20080530_OL9b.hex". On 2 of the runs, I got a P0244 CEL which basically means 'Turbo Wategate solenoid "A" range/performance high'. Actually one of the P0244 CEL came on when I did a 4th gear pull.
I've done a search on the romraider forumand some says this is a sign of boost creep. Could that be what is happening here? But why does it happen on only 2 of the runs? My boost controller didn't show that the boost hit more than 1.7 bar..(or maybe I didn't notice but the max boost shown on the boost controller does not indicate that either).
Some points to note:
1. I'm running on 1.7 bar of boost (which is what my car was tuned for on ecutek before I switched to romraider).
2. I've NOT changed anything else in my map other than the MAF scaling table. (I've reverted to stock settings on my WGDC and my AFR target table is mentioned in my earlier post).
Sigh... I posted the question on the forum... I hope someone will help me out.
No comments:
Post a Comment